Novitec Ferrari F8 Tributo Stage 2

Basic model:
    Description

    In 2021, Novitec Rosso presented another set of modifications to the Ferrari F8 Tributo model, which differed from other options in the presence of a spectacular aerodynamic body kit.

    The engine modification kit had three options “Novitec N-Tronic”, “Novitec Stage 2” and “Novitec Stage 3” and the ability to install a Novitec sports direct-flow exhaust system made of stainless steel with thermal insulation to reduce temperatures in the engine compartment.

    The first variant of "Novitec N-Tronic" included the presence of an electronic N-Tronic unit working together with the OEM engine control unit, resulting in a 3.9-liter turbocharged Ferrari F8 Tributo engine with 720 hp. began to produce 787 hp. at 8000 rpm and 882 Nm at 3000 rpm.

    The second version, "Novitec Stage 2", included the N-Tronic electronic unit and a new direct-flow exhaust system, resulting in power increasing to 802 hp. at 7950 rpm and 898 Nm at 3100 rpm.

    The third version, “Novitec Stage 3,” included the N-Tronic electronic unit and a new direct-flow exhaust system with sports catalysts, resulting in power increasing to 796 hp. at 8000 rpm and 890 N·m at 3000 rpm.

    The dynamics of the car also improved: acceleration to 100 km/h was reduced by 0.3 s to 2.6 s. The maximum speed, according to Novitec, was “more than 340 kph.”

    The suspension received new sports springs, which reduced the ground clearance by 35 mm. To pass speed bumps, it was proposed to use the factory front axle lift system. But if it was not installed on a particular F8, Novitec offered to equip it with its own version, raising the front of the car by 40 mm.

    The car also received wide forged Vossen NF10 wheels with a diameter of 21 inches at the front and 22 inches at the rear. The wheels could be painted in one of 48 glossy or matte shades. The tires offered were Pirelli P Zero in sizes 255/30 R21 and 335/25 R22.

    The exterior received a new N-Largo carbon fiber body kit from Novitec, which was designed by German designer Vittorio Strosek and completely changed the appearance of the car. The body kit included new bumpers, wider fenders that increase the car's width by 130mm, with integrated flaps, as well as side mirror caps, an engine cover trim, a new bonnet scoop and a subtle ducktail spoiler for added downforce. In addition, the car received unique headlights that were slightly smaller than the standard F8 and looked more aggressive.

    The Novitec company reupholstered the supercar's interior with leather and Alcantara, and announced a huge range of available colors.

    The planned production run of the Novitec Ferrari F8 Tributo N-Largo was 15 units.

    Sources

    Bodywork
    Years of production
    2021
    Body type
    купе
    Number of doors
    2
    Number of places
    2
    Engine
    Engine type
    бензиновый
    Engine location
    центральное, продольное
    Engine model
    Ferrari F154CD
    Cylinders
    V8
    V-angle
    90
    Capacity (cc)
    3905
    Power output (hp / kW /)
    802 /
    590 /
    at rpm
    7950
    Torque (N·m)
    898
    at rpm
    6100
    Bore (mm)
    86,5
    Stroke (mm)
    83,0
    Compression
    9,6
    Number of valves
    4/32
    Valvetrain
    DOHC-VVT
    Block material
    алюминиевый сплав
    Fuel system
    прямой впрыск
    Turbocharger
    2
    Specific
    Specific output (hp/litre)
    205,38
    Specific output (hp/tonne)
    558,89
    Specific output (kg/hp)
    1,79
    Specific torque (N·m/litre)
    229,96
    Specific torque (N·m/tonne)
    625,78
    Transmission
    Driven wheels
    задний
    Gearbox model
    F1
    Gearbox
    роботизированная
    Number of speeds
    7
    Final drive ratio
    4,375
    First gear ratio
    3,334
    Second gear ratio
    2,285
    Third gear ratio
    1,728
    Fourth gear ratio
    1,369
    Fifth gear ratio
    1,115
    Sixth gear ratio
    0,875
    Seventh gear ratio
    0,642
    Reverse gear ratio
    2,979
    Suspension
    Front suspension
    независимая на двойных поперечных рычагах
    Rear suspension
    независимая многорычажная
    Elastic elements in front
    пружины
    Elastic elements in rear
    пружины
    Front anti-roll bar
    да
    Rear anti-roll bar
    да
    Wheels brand
    Vossen NF9
    Wheel size front
    9,5J×21
    Wheel size rear
    12,5J×22
    Tire brand
    Pirelli P Zero
    Tyres front
    255/30 R21
    Tyres rear
    335/25 R22
    Steering
    Steering type
    шестерня-рейка
    Power steering
    гидравлический
    Turning diameter (m)
    10,8
    Brakes specs
    Brakes front
    дисковые вентилируемые
    Brakes rear
    дисковые вентилируемые
    Brand of brakes
    Brembo
    Front brake diameter (mm)
    398×223×38
    Rear brake diameter (mm)
    360×233×32
    Disc material
    карбон-керамика
    Number of caliper pistons (front/rear)
    6/4
    Anti-lock braking system
    да
    Dimensions and weight
    Body
    монокок с панелями
    Body material
    углеволокно
    Length (mm)
    4611
    Width (mm)
    1979
    Height (mm)
    1171
    Wheelbase (mm)
    2650
    Front track (mm)
    1677
    Rear track (mm)
    1646
    Ground clearance (mm)
    70
    Dry weight (kg)
    1330
    Curb weight (kg)
    1435
    Trunk volume max (litre)
    200
    Weight distribution (%)
    41,5/58,5
    Performance specs
    Ecological class
    Евро 6
    CO₂ emissions (WLTP) Combined (g/km)
    490
    Fuel tank capacity (l)
    78
    Fuel type
    Аи-98
    Dynamic specs
    Acceleration 0-100 kph (s)
    2,6
    Braking distance 100-0 kph (m)
    31
    Braking distance 130-0 kph (m)
    56
    Braking distance 200-0 kph (m)
    119
    Braking distance 60-0 mph (m)
    30
    Top speed (kph)
    350
    Top speed (mph)
    217
    Last modified
    04.10.2023

    Add new comment