Ferrari FX

    Description

    The Ferrari FX was a unique sports car custom-made by Pininfarina for the Sultan of Brunei, Hassanal Bolkiah (29th of the ruling dynasty of Brunei), known for his passion for rare and expensive cars, in his collection there are from 3000 to 7000 cars, of which about half a thousand Ferrari. The order consisted of seven cars (according to other information - nine) based on the Ferrari F512M. The Sultan had a habit of buying cars in bulk, and the cost of designing his personal models was spread over several copies. For example, he bought two Ferrari F90s, six Bentley Grand Prix and three Aston Martin AM4s.

    The cars were developed from scratch, and the unlimited budget allowed for the full use of the creativity of Pininfarina's employees, combined with the latest technology of the time. The car bodies were made of aluminum and precisely fitted to the spatial structures of the 512M. Where possible, carbon fiber was used, from which the engine compartment covers, doors and wheel arches were made, and the rear hood was made of plexiglass. Given the changed rear of the car, the exhaust system was redesigned.

    Once built, the cars went to Williams Grand Prix Engineering Limited, where the team fitted them with a 7-speed sequential manual transmission, tuned the chassis and car controls. But suddenly the Sultan closed the project, taking 6 finished copies. Car number 4 (chassis number 103396) in blue was just completed with a box and was unfinished. But Williams completed it and decided to sell it. The buyer was Dick Marconi from the USA. It is this car that is exhibited at the museum in Tustin (California).

    Thanks to a new engine exhaust system, as well as a possible reconfiguration of control systems, power has increased from 440 hp. up to 471 hp Which, in combination with the reduced weight of the car by 275 kg (20%), gave an improvement in dynamic performance.

    The interior, impeccably crafted in leather and suede, focuses on the shift paddles of the sequential shift gearbox behind the Momo steering wheel, very unusual at that time on non-Formula 1 cars. Also of interest are the emergency engine shutdown button, aluminum door handles, a gearshift joystick and a plaque confirming the uniqueness of the car, specially made for the royal family from Brunei.

    All cars were made with the right wheel.

    Sources

    Bodywork
    Years of production
    1995-1996
    Produced (pcs.)
    7
    Body type
    купе
    Number of doors
    2
    Number of places
    2
    Engine
    Engine type
    бензиновый
    Engine location
    центральное, продольное
    Engine model
    Ferrari Tipo F113 G Flat-12
    Cylinders
    V12
    V-angle
    180
    Capacity (cc)
    4943
    Power output (hp / kW /)
    471 /
    346 /
    at rpm
    6750
    Bore (mm)
    82,0
    Stroke (mm)
    78,0
    Compression
    10,4
    Number of valves
    4/48
    Valvetrain
    DOHC
    Block material
    алюминиевый сплав
    Oil sump capacity (l)
    11,5
    Cooling volume (l)
    20,0
    Fuel system
    впрыск
    Fuel system model
    Bosch K-Jetronic
    Turbocharger
    Specific
    Specific output (hp/litre)
    95,29
    Specific output (hp/tonne)
    348,89
    Specific output (kg/hp)
    2,87
    Transmission
    Driven wheels
    задний
    Gearbox
    секвентальная
    Number of speeds
    7
    Suspension
    Front suspension
    независимая на двойных поперечных рычагах
    Rear suspension
    независимая на двойных поперечных рычагах
    Elastic elements in front
    пружины
    Elastic elements in rear
    пружины
    Front anti-roll bar
    да
    Rear anti-roll bar
    да
    Wheel size front
    8,0J×18
    Wheel size rear
    10,5J×18
    Tire brand
    Pirelli P Zero
    Tyres front
    235/40 R18
    Tyres rear
    295/35 R18
    Steering
    Steering type
    шестерня-рейка
    Power steering
    Turning diameter (m)
    12,6
    Steering wheel turns
    3,2
    Brakes specs
    Brakes front
    дисковые вентилируемые
    Brakes rear
    дисковые вентилируемые
    Front brake diameter (mm)
    315
    Rear brake diameter (mm)
    310
    Anti-lock braking system
    да
    Dimensions and weight
    Body
    стальной трубчатый каркас
    Body material
    углеволокно, алюминий
    Curb weight (kg)
    1350
    Max. weight (kg)
    1560
    Performance specs
    Fuel tank capacity (l)
    100
    Fuel type
    Аи-98
    Dynamic specs
    Acceleration 0-100 kph (s)
    4,5
    Top speed (kph)
    330
    Top speed (mph)
    205
    Last modified
    04.09.2023

    Add new comment