Novitec Ferrari F8 Tributo

Basic model:
    Description

    In 2020, the Novitec Rosso studio presented its version of the refinement of the Ferrari F8 Tributo model, which has been produced since 2019. The refinement kit included: forcing the power unit, upgrading the suspension, interior and replacing rims with tires.

    The refinement of the power unit included the replacement of the electronic engine control unit with an N-Tronic unit and the installation of a stainless steel sports exhaust system. As a result, the 3.9 twin-turbo V8 engine received a performance boost: output increased from 720 hp to 720 hp. and 770 Nm up to 787 hp and 882 Nm of torque.

    The increased power characteristics of the engine made it possible to reduce the acceleration time from 0 to 100 kph by 0.2 s to 2.7 s. The maximum speed, according to Novitec, became "faster than 340 kph."

    The upgrade package included a Novitec sports exhaust system. The system was made of stainless steel and provided with thermal insulation to reduce the temperature in the engine compartment, and could optionally be supplied with an electronic sound control system.

    The suspension received new sports springs, due to which the ground clearance was reduced by 35 mm. To pass speed bumps, it was proposed to use the factory system for lifting the front axle. But if it was not installed on a particular instance of the F8, Novitec offered to equip it with its own version, which raises the front of the car by 40 mm.

    From the outside, it was possible to recognize the Ferrari F8 Tributo with modifications from Novitec only by wheels of different dimensions - regular 20-inch wheels with a directional pattern were replaced with 10-spoke Vossen NF9 forged products with a diameter of 21 inches at the front and 22 inches at the rear. Wheels can be painted in one of 72 glossy or matt shades. As tires offered Pirelli P Zero dimension 255/30 ZR21 and 335/25 ZR22.

    The interior of the supercar company Novitec Rosso dragged leather and alcantara into its kit, while a huge available color range was announced.

    Sources

    Bodywork
    Years of production
    2020
    Body type
    купе
    Number of doors
    2
    Number of places
    2
    Engine
    Engine type
    бензиновый
    Engine location
    центральное, продольное
    Engine model
    Ferrari F154CD
    Cylinders
    V8
    V-angle
    90°
    Capacity (cc)
    3905
    Power output (hp / kW /)
    787 /
    579 /
    at rpm
    7000
    Torque (N·m)
    882
    at rpm
    6000
    Bore (mm)
    86,5
    Stroke (mm)
    83,0
    Compression
    9,6
    Number of valves
    4/32
    Valvetrain
    DOHC-VVT
    Block material
    алюминиевый сплав
    Fuel system
    прямой впрыск
    Turbocharger
    2
    Specific
    Specific output (hp/litre)
    201,54
    Specific output (hp/tonne)
    548,43
    Specific output (kg/hp)
    1,82
    Specific torque (N·m/litre)
    225,86
    Specific torque (N·m/tonne)
    614,63
    Transmission
    Driven wheels
    задний
    Gearbox model
    F1
    Gearbox
    роботизированная
    Number of speeds
    7
    Final drive ratio
    4,375
    First gear ratio
    3,334
    Second gear ratio
    2,285
    Third gear ratio
    1,728
    Fourth gear ratio
    1,369
    Fifth gear ratio
    1,115
    Sixth gear ratio
    0,875
    Seventh gear ratio
    0,642
    Reverse gear ratio
    2,979
    Suspension
    Front suspension
    независимая на двойных поперечных рычагах
    Rear suspension
    независимая многорычажная
    Elastic elements in front
    пружины
    Elastic elements in rear
    пружины
    Front anti-roll bar
    да
    Rear anti-roll bar
    да
    Wheels brand
    Vossen NF9
    Wheel size front
    9,5J×21
    Wheel size rear
    12,5J×22
    Tire brand
    Pirelli P Zero
    Tyres front
    255/30 R21
    Tyres rear
    335/25 R22
    Steering
    Steering type
    шестерня-рейка
    Power steering
    гидравлический
    Turning diameter (m)
    10,8
    Brakes specs
    Brakes front
    дисковые вентилируемые
    Brakes rear
    дисковые вентилируемые
    Brand of brakes
    Brembo
    Front brake diameter (mm)
    398×223×38
    Rear brake diameter (mm)
    360×233×32
    Disc material
    карбон-керамика
    Number of caliper pistons (front/rear)
    6/4
    Anti-lock braking system
    да
    Dimensions and weight
    Body
    монокок с панелями
    Body material
    углеволокно
    Length (mm)
    4611
    Width (mm)
    1979
    Height (mm)
    1171
    Wheelbase (mm)
    2650
    Front track (mm)
    1677
    Rear track (mm)
    1646
    Ground clearance (mm)
    70
    Dry weight (kg)
    1330
    Curb weight (kg)
    1435
    Trunk volume max (litre)
    200
    Weight distribution (%)
    41,5/58,5
    Performance specs
    Ecological class
    Евро 6
    Fuel tank capacity (l)
    78
    Fuel type
    Аи-98
    Dynamic specs
    Acceleration 0-100 kph (s)
    2,7
    Braking distance 100-0 kph (m)
    31
    Braking distance 130-0 kph (m)
    56
    Braking distance 200-0 kph (m)
    119
    Braking distance 60-0 mph (m)
    30
    Top speed (kph)
    346
    Top speed (mph)
    215
    Last modified
    06.09.2023

    Add new comment